Coraid designs, manufactures and sells a complete line of Clustered Modular Storage products that can operate in a high availability clustered configuration to scale storage capacity and performance. Coraid EtherDrive® Storage Products connect to the network using standard Ethernet. With EtherDrive Storage you can create a fast shared storage system from a few Terabytes to multiple Petabytes for under £0.35 per Gigabyte and are available with& 10 Gigabit Ethernet interface when applications require maximum storage access speed.
Coraid's simple Logical Volume Manager appliance is also available for EtherDrive storage, allowing a scaleable pool of physical storage to be virtualized into a Logical Volumes of any size.
AoE: The FAST & Inexpensive Alternative to iSCSI & Fibre Channel SAN!
AoE is a simple, non-routable protocol designed specifically to transport SATA disk commands over Ethernet. Coraid products take full advantage of the simplicity of the ATA-over-Ethernet (AoE) storage protocol, to provide a simple and affordable alternative to iSCSI or Fibre Channel SAN. AoE delivers a simple, high performance, low cost alternative to iSCSI and FibreChannel for networked block storage by eliminating the processing overhead of TCP/IP. AoE is natively supported in Linux 2.6.11 and beyond.
AoE enables disk drives to become AoE devices connected directly to an Ethernet network. An AoE device can be a single physical disk or a logical device made up of multiple disks. EtherDrive Appliances are AoE target devices.
Coraid EtherDrive® Storage Products use the ATA-over-Ethernet (AoE) storage protocol. AoE provides a means for a block storage device to be connected directly to an Ethernet network. An AoE device can be a single physical disk or a logical device made up of multiple disks. EtherDrive products offer internal RAID (0, 1, 5, 10), hot-swappable disks, and support standard SATA disk drives. EtherDrive products are AoE target devices.
EtherDrive Appliances
EtherDrive Appliances are Storage Appliances with internal RAID – they provide a shared Ethernet interface for multiple disks. These simple to use appliances provide a bridge between the disks and Ethernet using AoE. Each disk can be individually accessible on the network (JBOD) or can be configured into RAID sets presenting one or more logical EtherDrive storage devices to the network.
SR821 EtherDrive Storage Appliance, Model #CED2U8SS
Eight SATA disk slots plus RAID in a 2U shelf with redundant hot swap power modules, hot swap fans with two Gigabit Ethernet connections, provides networked storage capacity of up to 16TB when used with 2TB disk drives .
JBOD and RAID 0,1,5,6,10 are supported. The shelf is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Shelf dimensions 17.5" x 3.5" x 25.5", weight without disks 55 lbs.
2U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
SR1621 EtherDrive Storage Appliance, Model #CED3U16SS
Sixteen SATA disk slots plus RAID in a 3U shelf with redundant hot swap power modules, hot swap fans with two Gigabit Ethernet connections, provides networked storage capacity of up to 32TB when used with 2TB disk drives .
JBOD and RAID 0,1,5,6,10 are supported. The shelf is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Shelf dimensions 17.5" x 6.9" x 25.5", weight without disks 55 lbs.
3U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
EtherDrive® SR2421 Storage Appliance, Model #CED4U24SS
Twenty four SATA disk slots plus RAID in a 4U shelf with redundant hot swap power modules, hot swap fans with dual port Gigabit Ethernet connections, provides networked storage capacity of up to 48TB with user installed 2TB disk drives.
JBOD and RAID 0,1,5,6,10 are supported. The shelf is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Shelf dimensions 17.5" x 6.9" x 25.5", weight without disks 75 lbs.
4U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
High Performance 10 Gigabit EtherDrive SRX Series Appliances
Designed for performance, scalability, simplicity and virtualization, EtherDrive® SRX storage arrays enable a scale-out Ethernet SAN architecture that is ideally suited to dynamic HPC, video, virtualization and cloud environments.
16 - SAS, SSD or SATA disk slots, plus RAID in a 3U shelf with redundant hot swap power modules and hot swap fans
JBOD and RAID 0,1,5,6,10 are supported. The shelf is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Dimensions 17.2" x 5.2" x 25.5", weight without disks 65 lbs.
3U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
32 TB Capacity (with 2 TB disks)Up to four 10 GigE or six GigE interfaces options
EtherDrive® SRX3200 High Performance Ethernet Storage Appliance, Model #CED4U24SS
24 - SAS, SSD or SATA disk slots, plus RAID in a 4U shelf with redundant hot swap power modules and hot swap fans
JBOD and RAID 0,1,5,6,10 are supported. The shelf is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Dimensions 17.5" x 7" x 25.5", weight without disks 75 lbs.
4U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
EtherDrive® SRX3500 Ethernet Storage Appliance, Model #CED2U24SS
24 - SAS, SSD or SATA disk slots, plus RAID in a 2U shelf with redundant hot swap power modules and hot swap fans
JBOD and RAID 0,1,5,6,10 are supported. The shelf is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Dimensions 17.5" x 3.5" x 25.5", weight without disks 45 lbs
2U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
14 TB Capacity (with 600 GB disks)
Supports 24 SAS, SSD or SATA hot swap disks
Up to four 10 GigE or six 1 GigE interfaces options
EtherDrive® SRX4200 High-Performance Ethernet Storage Appliance, Model #CED4U36SS
36 - SAS, SSD or SATA disk, plus RAID in a 4U shelf with redundant hot swap power modules and hot swap fansJBOD and RAID 0,1,5,6,10 are supported. The appliance is equipped with a Universal Power Supply (115-230VAC, 50/60Hz) that has two IEC power cord connections.
Dimensions 17.5" x 7" x 25.5", weight without disks 75 lbs.
4U Ethernet SAN storage appliance
CorOS™ parallel processing scale-out SAN operating system
72 TB Capacity (with 2TB disks)
Supports 36 SAS, SSD or SATA hot swap disks
Up to four 10 GigE or six 1 GigE interfaces options
EtherDrive Storage Appliances use the open ATA-over-Ethernet (AoE) network storage protocol. AoE is a fast, simple, affordable alternative to Fibre Channel or iSCSI storage. Coraid's EtherDrive VirtualStorage Appliances can be added to an EtherDrive AoE SAN to create dynamically resizeable (elastic) AoE target devices (LUNs) from physical AoE devices.
The CLN21 is a 64 bit Linux server in a 1U rack mount chassis. It boots from flash and mounts AoE storage LUNs located in EtherDrive Storage Appliances connected via an AoE SAN. Clients share files using NFS or SMB/CIFS protocols over TCP/IP connections.
The CLN21-FT is an active-passive pair of 64 bit Linux servers in 1U rack mount chassis. They boot from flash and mount AoE storage LUNs located in EtherDrive Storage Appliances connected via an AoE SAN. Only one CLN21 is active at any one time. Heartbeat signals are passed between the primary (active) and backup (passive) servers. Heartbeat also controls a power switch to provide STONITH protection. Clients share files using NFS or SMB/CIFS protocols over TCP/IP connections.
CLN21-FT NAS Gateway can be used with multiple EtherDrive Storage Appliances to create a system with NSPOF (No Single Point of Failure).
For more information on these solutions or to discuss your individual requirements, please contact the NAS sales team on 01491 821640 or complete and submit your contact details here